Weatronic expands the GRAUPNER 2.4 GHz range of products
22.09.2009
In addition to the 2.4 GHz iFS products our range now includes the WEATRONIC 2.4 GHz Dual FHSS system
- 2.4 Dual FHSS stands for Dual Frequency Hopping Spread Spectrum in the 2.4 GHz ISM band
- 80 frequencies continuously switching at a rate of 100 times per second
- Adaptive frequency hopping, bi-directional
- More than 120 systems can be operated simultaneously
- Redundant transmission and reception using two groundplane (patch) aerials
- Dual receivers - full redundancy and spatial diversity
- Transmit / receive data can be recorded on an SD card in the twelve-channel transmitter module, and can be followed live on a PC
- Integral telemetry such as voltage - temperature - field strength can be used without additional sensors
- Comprehensive software package for configuring the transmitter / receiver unit using the USB port
- Visible and audible operating state information and warnings generated at the same time
- Made in Germany
 |
The weatronic® transmitter module is housed in a low-profile case which is plugged into the transmitter (interchangeable RF module type) using a mounting adapter. The connection to the transmitter is completed by a connecting lead and an adapter housing matching the original module, or - if installed internally - by an adapter circuit board. The weatronic® transmitter module transmits and receives using two groundplane (patch) aerials, and is capable of transmitting twelve channels.
Dimensions: 85 x 65 x 19 mm
Weight: 55 g |
The Micro Dual Receiver 2.4 FHSS series is available with 8 - 10 and 12 channels
The receiver is of double construction featuring two robust four-layer circuit boards. Its sensitivity is very high, and its interference rejection extremely effective. At the same time it operates as a transmitter for telemetry and measured data. Suitable for small and medium-sized models, gliders and helicopters. Programmable fail-safe from the transmitter, separately for each channel, twin aerials. Firmware update via USB programming adapter, the latest
generation of 32-bit processors, double Watchdog function, sophisticated output interference suppression, high current load capacity, 5.0 Volt signal voltage, operating voltage 4.0 - 10.0 Volt, two function indicator LEDs, external electronic switch / regulator available.
Dimensions: 55 x 35 x 19 mm
Weight: 30 g |
|
For a detailed overview of the entire range of WEATRONIC products please refer to our current Inflo-Flyer.